Datasheet

28/04/2020
MADE in FRANCE
- EN 60974-1
www.gys.fr
car-body
Easier to use, the GYS split bumper repair staples in stainless steel allow fast and accurate work. These staples are useful
for joining and repairing all plastic parts of vehicles (dashboard, bumpers, headlight surrounds, etc.)
Compatible with:
When a current ows through it, the staple heats up
and can thus penetrate into the plastic material to
repair all types of cracks.
1 • Make sure that there is no dust or grease on the plastic
surface.
2 • Choose the right clip
3 • When hot, it easily penetrates into the plastic to be
repaired.
4 • The clip thus becomes a resistant reinforcement on the
welded part.
USEFUL !
GYS staples are pre-cut and can be easily broken by hand, saving
time:
The benets :
- No cutting with pliers to cut the staples
- Pre-cut staples at their base
- A simple press of the nger breaks the protruding rod
- inside the molten plastic
- No overow of the rods once broken
- No need for grinding
- No projection of the staple rods in the workshop and on the
oor
- No risk of injury (projection to the face or eye)
CAUTION :
• Do not touch the staples during welding
• Do not use the staples on any surface other than plastic
Stapler for bumper repair
Ref. 052925
Stapler for battery bumper repair
Ref. 048676
Staple range :
GYS has developed a complete range of staples for each application. They are suitable to a wide range of cracks. There
are 5 different types of staples with different shapes: angle, edge, cracks, for better repairs.
V
U N W
M
Narrow internal angle Crack alignment Signicant cracking Internal angle Outer corner
Ref. 047990 Ref. 047983 Ref. 047976 Ref. 047969 Ref. 047952
Ref. 047990-047983-047976-047969-047952
Pre-cut STAPLE