Datasheet

EUROPROTECTION – 420, rue de la Dombes – 01700 MIRIBEL – FRANCE
ARGON TYPE WELDING GLOVES
Ref. 2540 (réf. GYS 045194)
TECHNICAL
DATA SHEET
SIZES AND DIMENSIONS
GENERAL DESCRIPTION AND MATERIALS
SPECIFIC BENEFITS
MAIN AREAS OF USE
CONDITIONNEMENT
NORMALIZATION
EN420:2003+A1:2009
EN388:2016
• Welder's gloves
• Argon type
• Full grain lamb leather
• 15 cm crust cuff
• Comfort
• High flexibility
• Dexterity
• Welding work
• Metallurgy
• Cold welding type Argon
• 1 pair
Size 9 10
Ref. 2539 2540
Total length (mm) 355 355
Cuff height (mm) 145 145
Cuff width (mm) 165 165
Width of glove inlet (mm) 130 135
Palm width (mm) 115 125
3011X
EN407:2004
422X4X
• Resistance to contact heat = 2/4
• Resistance to convective heat = 2/4
• Resistance to radiant heat = X
• Resistance to small splashes of molten metal = 4/4
• Resistance to large molten metal splashes = X
EN12477:2001+A1:2005
Type B – greater dexterity
This glove conforms to the model of the personal protective equipment covered by the EC type
6479 certificate issued by SATRA (organisation n°0321)
• Abrasion = 3/4
• Cutting by slicing = 0/5
• Tearing = 1/4
• Perforation = 1/4
• Cutting TDM = untested
• Flammability resistance = 4/4