Datasheet

27/01/2020
- EN 60974-1
MADE in FRANCE
EN60976-1
(40°C)
Electronic
Control
ømm
original
equipement
Option
Ø
min▷max
Istandard Ipulse
GAS m/kg
MB 15
M6
15▷200
20A (100%)
160A (40%)
200A (20%)
20A (100%)
160A (33%)
200A (15%)
0.6 - 1.0 0.6/0.8-1.0 - 4 m / 2,9 kg
MB 25
15▷220
20A (100%)
160A (40%)
220A (20%)
20A (100%)
160A (33%)
220A (15%)
0.8 - 1.2 0.8-1.0/1.2 0.6/0.8-1.0 4 m / 3 kg
R
O
L
L
E
R
I
N
S
I
D
E
SELECT
UP / DOWN
MB25:
Option.
Ø 0,6-0,8/1,2
MB15 - 160 A : 044111 (4 m)
MB25 - 220 A : 046283 (4 m)
TORCH
The «Push-Pull» torch has an integrated wire feed motor within the handle. Due to its synchronisation
with the wire feeder the welding generator the wire speed is extremely smooth / consistent. This
double action is ideal when the very best results are required when welding small diameter or soft
wires which can otherwise be harder to feed smoothly.
REMOTE SETTINGS
With the «SELECT» button it is possible
to choose the arc height by selecting the
orange led or the wire speed by selecting
the green led. Adjust settings with the «UP/
DOWN» button.
Wire speed
Arc height
The PUSH-PULL torch has been designed to work with the generators :
NEOPULSE 220C (061835) / PULSEMIG 220 C (063273)
NEOPULSE 220 C XL (061842) / PULSEMIG 220 C XL (063280)
AUTOPULSE 220 M3 (032729) / CARPULSE 220 M3 (036819)
AUTOPULSE 320 T3 (032798) / CARPULSE 320 T3 (036826)
ERGONOMIC AND EFFICIENT
COMPATIBILITY
The PUSH-PULL torch is able to deliver a high duty cycle due to its air cooling system.
Duty cycle : 160 A at 40 % (MB15) and 220 A at 20% (MB25).
«UP/DOWN» button on the handle.
Torch weight: only 970 grammes.
Maximum width : 66 mm.
Constant and optimum wire feed.
4 metre torch cable.
Designed for wire of diameters 0.6, 0.8, 1.0 and 1.2 mm and recommended for welding aluminium wire diameter (0.6 -
0.8 mm).
PUSH-PULL Torch