Datasheet
23/03/2017
MADE in FRANCE
- EN 60974-5
NOMADFEED 425-4
ømm
ømm
équipé d’origine /
original equipement /
originalausstatung /
equipamiento de fabrica
EN60974-5
(40°C)
IP
U
1
GAS
NO
GAS
200 300
Electronic
Control
m/min
cm/kg
17 Vdc - 113 Vdc
30 Vac - 80 Vac
0.6
-
1.6
0.9 / 1.0
-
2.4
100 W
1.0
-
24.0
1.6
cored wire
425 A @ 60%
300 A @ 100%
23
60x22x43
/ 14.6
m/min
inch/min
MIG / MAG
WIRE FEEDER
Ref. 036291
Supplied without accessories
Power supply voltage
Thermal indicator
Overvoltage indicator
Voltage at torch
indicator
Welding voltage
Welding current
Wire feed speed
Wire speed
potentiometer
ACCESSORIES
OPTIMUM MIG/MAG SETTINGS
DESIGNED FOR SITE WORK
The NOMADFEED 425-4 is a wire feed case that takes its power directly from the welding circuit. . Ideal for MIG/
MAG, the feed case is recommended for site work and is compatible with most welding generators in the market.
www.gys.fr
ERGONOMIC
HEAVY DUTY
15 m
95 mm
2
038349
20 m
95 mm
2
038431
5 m
95 mm
2
032439
10 m
95 mm
2
032446
Connection
cables
Cables
Electronically controlled wire speed adjustable using the
potentiometer at the front of the machine.
Choice of 2 torch trigger modes : 2T or 4T.
Wire speed regulation modes :
CC (current source) or CV (voltage source).
Soft start function : easier rst contact with the metal.
Precise wire pressure adjustment.
Choice of information displayed on screen.
Display of current/voltage/wire speed (for DMOS).
Display screen is readable even in very bright situation.
Straightforward interface with buttons designed to be
operated while wearing gloves.
EURO torch connection.
Easy wire feed.
Quick torch air purge.
Heavy duty cycle for enhanced productivity (425A @ 60%).
Compatible with air cooled torches and water cooled
torches connected to an external cooling unit.
Powerful electronically regulated wire feed motor (100W).
The 4 drive rolls ensure a smooth feed on all types of wire.
Electronics protected from water and dust.
IP 23 protection rated for outside use.
Filtered gas connection to prevent impurities from
entering the circuit.
Complete range of connection cables (optional).
Fitted with a handle for better portability.
Protected up to 400V
Standard drive rolls Type E - Ø 30 mm Type C - Ø 37 mm
Cored wire Ø 1.6 (038615) Ø 1.2 / 1.6 (038646)
E
C