Datasheet

ManualsBrandsGys ManualsMIG - PROMIGPROMIG 400 4S DUO DV - 230/400V (no accessories)

14/10/2020

MADE in FRANCE

- EN 60974-1

ømm

équipé d’origine /

original equipement /

originalausstatung /

equipamiento de fabrica

EN60974-1

(40°C)

50/60hz

min▷max

GAS

100 200 300

Electronic

Control

(60%)

(I2 max)

cm/kg

Protected & compatible

POWER GENERATOR

(+/- 15%)

400V 3~ 16A

40-350A

0.8

1.2

- -

 

1.0/1.2 - 270A

350A

35%

49x89x88

/ 109

17 kVA

230V 3~ 25A

PROMIG 400-4S DUO.DV

MIG - MAG

40▷350A

Ref. 035911

Three phase «Synergic» 350 Amp MIG welder with 4 drive rollers. Ideal for maintenance and industrial production work.

Increase productivity - With two individual wire feeders it enables two different wire types/sizes are tted at the same time thus avoiding time

consuming wire and gas bottle changes.

SIMPLIFY YOUR WORK

2 wire feeders :

2 torches :

2 gas controls : Two solenoid valves enable different gas types to be selected just by

pressing the trigger e.g Argon for aluminium used with the main machine and Argon/CO2

for steel on the separate wire feed unit.

2x faster :

2x more versatile :

2 wire feeders :

2 torches :

2 gas controls : Two solenoid valves enable different gas types to be selected just by

pressing the trigger e.g Argon for aluminium used with the main machine and Argon/CO2

for steel on the separate wire feed unit.

2x faster :

2x more versatile :

CONCEPT DUO

GYS experience integrated in more than 1000 parameters managed by microprocessor.

2 MODES : SYNERGIC OR MANUAL

Synergic mode : Optimum results without adjusting the wire speed :

• Select wire type

• Select wire size

• Select the power (refer to table on the front of the machine)

PROMIG 400-4S DUO will ensure :

• Optimum wire speed

• Pre-gas / post-gas

• Burnback

PROMIG 400-4S DUO will display :

• Wire speed

• Voltage

• Current

For WPS in the eld of application of a WPQR.

WPS : Welding Procedure Specication

WPQR : Welding Procedure Qualication Record

Manual mode : Manual adjustement option of the wire speed and power.

See data sheet for the wire

feeder TF-4RN - Ref. 061699

Generator delivered without

wire feeder and accessories

Réf. 035911

PACK

TYPE

(Without

regulator)

035980

Promig 400-4S DUO.DV

ref. 035911

Wire feeder TF-4RN

ref. 061699

Connection cable

10m – 70 mm² ref. 034860

Earth cable

4m - Ø 50 mm²

ref. 043824

Steel/Stainless

350A – 4m (AIR)

ref. 040946

Aluminium

350A – 3m (AIR)

ref. 040731

x2 Ø 1/1,2mm

ALU

ref. 040915

036123