Datasheet
30/05/2022
MADE in FRANCE
- EN 60974-1
ømm
ømm
équipé d’origine /
original equipement /
originalausstatung /
equipamiento de fabrica
EN60974-1
(40°C)
U
0
50/60hz
min▷max
GAS
NO
GAS
100 200 300
Electronic
Control
IA
(60%)
X%
(I2 max)
cm/kg
Protected & compatible
POWER GENERATOR
(+/- 15%)
400V - 3~ 16A
40-350A
0.8
-
1.2
- -
1.0/1.2 - 270A
350A
35%
17V
37V
49x89x88
/ 108
17 kVA
PROMIG 400-4S 400V - 3 Φ
P.N. 035898
The PROMIG 400-4S is the ideal three-phase welding machine featuring GYS’ in-house ‘synergies.
Designed for locksmith work, general maintenance work and semi-industrial production processes,
this unit is suitable for welding steel, stainless steel and aluminium. It is recommended for heavy-duty,
professional use up to ø 1.2 mm (ø 1.6 mm occasionally) using its four wire-feed reels.
THREE AVAILABLE TRIGGER MODES
TWO AVAILABLE WELDING MODES: MANUAL OR SYNERGY
Enjoy all of GYS’ professional experience with more than 1,000 integrated setting
combinations, all controlled by a cutting-edge micro-processor.
Synergic mode : Optimum results without manually adjusting the wire-feed speed:
• Select the wire type
• Select the wire size
• Select the power (refer to table on the front of the machine)
The PROMIG 400-4S clearly displays the:
• The optimum wire speed
• Pre-gas / Post-Gas
• Burnback
The PROMIG 400-4S clearly displays the:
• Wire speed
• Voltage
• Current
This is to carry out WPS when creating a WPQR.
WPS: Welding Procedure Specication
WPQR: Welding Procedure Qualication Record
Manual mode: For those who wish to manually
adjust the wire-feed speed and power.
- Supplied without accessories (P.N.
035898)
www.gys.fr
2T: two stroke welding
4T: four stroke welding, welding for a long time without constantly
pressing the trigger.
Spot: for spot welding
PRODUCT
In ‘synergy’ mode, the parameter settings are fast and simple. The device’s
micro-processor controller will automatically set the optimum wire speed. This
avoids complex set-up procedures and ensures the optimal settings are used
every time.
DESIGNED FOR HEAVY-DUTY WORK
The PROMIG 400-4S is suitable
for ø 200 mm (5 kg) or ø 300
mm (15 kg) wire-feed reels. It
is equipped with a four wire-
feed reels, making it ideal for
feeding soft, aluminium wires
as well as other
demanding applications
PACK TYPE : 035935 (alu) / 035928 (steel)
Promig 400-4 S
P.N. 035898
Earth cable
4 m - Ø 50 mm²
P.N. 043824
Aluminium
350 A – 3 m (AIR)
P.N. 040731 (alu)
350 A – 4 m (AIR)
P.N. 040946 (steel)
x2 Ø 1/1.2 mm
ALU
P.N. 040915
MIG - MAG
40 - 350 A