Datasheet

23/12/2019
MADE in PRC
MMA
I²
ømm
ømm
équipé d’origine /
original equipement /
originalausstatung /
equipamiento de fabrica
EN60974-1 (40°C)
MIG MMA
50/60hz
min
▷max
GAS
NO
GAS
100 200
Electronic
Control
IA
(60%)
X%
(I2 max)
IA
(60%)
X%
(I2 max)
cm/kg
230V
1~
16A
20
▷120A 30▷140A
0.6
-
0.8
0.9
 
0.8
-
0.9
0.8 80A
140A
15%
70A
120A
15%
40x20x33
/ 9.6
EASYMIG 150
www.gys.com
- EN 60974-1
3
in 1
MIG-MAG
GAS
MIG-MAG
NO GAS
MMA
RUTILE
GAZ
NO GAZ
INVERTER
Ø 1.6>3.2 mm
MMA
MIG-MAG
SINGLE PHASE
INVERTER
30  140A
Ref: 032248
• Supplied with a removable
torch 150 A - 2.20 m tted for
steel.
• EURO torch for a fast
assembly/disassembly.
• ø100 (1 kg) wire reels.
• ø200 (5 kg) wire reels.
• 2 rollers motor
• Supplied rollers :
steel : 0.8
no gas : 0.9
• 9.6 kg weight.
• Ergonomic handle.
• Reinforced mechanical structure.
• Pads for shock and vibration
absorption.
• Voltage set selection from 15
to 21 V.
• Wire speed selection from 3 to
10 m/min.
2 colour LED to display :
• Thermal protection.
• Power up.
• For NO GAS welding.
Integrated wire feeder
MIG/MAG Torch
MIG/MAG - MMA
Easy set up
Simplied display
Polarity reversal cable
• Wire diameter Ø 0.6 mm
to 0,8 mm.
• Électrode Ø 1.6 mm à 3.2 mm.
Ultra-light and portable
Sturdy build quality
Can weld rutile electrodes .
Antisticking (prevents electrode sticking at
start).
Inverter technology to ensure
an excellent welding current quality
and a low electric consumption.
This process allows :
• Welding with cored wire (requires polarity
reversal).
• Allows outdoor welding (not wind.
affected...)
• Increased portability due to absence of gas
bottles.
• Ideal for outdoors work on thin metal
sheets.
Can weld :
- MIG/MAG wire with gas
- MIG/MAG cored wire without gas
Includes
• Earth clamp
(cable 1.6 m / 16 mm²)
• Electrode holder
(cable 1.6 m / 10 mm²)
Features NO GAS ready to weld
The EASYMIG 150 is a semi-automatic machine that combines MIG/MAG, cored wire and MMA welding
processes. Thanks to its user-friendly interface, the voltage and wire speed settings are made easier.
Ultra-light, it is easy to carry around. The EASYMIG 150 is recommended for welding steel, stainless
steel and aluminium.
• Accessories bag
- Contact tip 0.9 mm.
- Gas nozzle « gas ».
- Tightening key for contact tips.
- Gas tube 1 m.
- 2 clamps for the gas tube.