Datasheet

50 / 60 Hz
Icharge
V
Charge
Maintenance
Ondulation/
Ripple
Charging
curve
kg
mm
mm
IP
100-240 V AC 15 W
0.8 A 12 V 1.6 < 25 Ah 1.6 < 80 Ah
<0.1 Ah/
month
<100 mV
Rms
IU
0
U
0.33
130 x 65
x 38
150 x 206
x 55
IP 44
1.6 m
ARTIC 800
MADE in PRC
- EN 60335-2-29
Supplied with:
Clamps
(35 cm)
Eyelets - M6
(30 cm)
Male connector
(85 cm)
Ref. 029569
The unattended charge and maintenance ensure maximum battery
performance and longevity.
100% AUTOMATIC CHARGE
BATTERY
CHARGER
12 V
The ARTIC 800 (0.8 A) is specically designed to charge 12 V batteries such as motorbikes, jet-skis,
go-karts, or lawnmowers, providing an automatic charge controlled by microprocessor. Efcient,
compact and light, it provides a 2 times faster charge than a traditional charger (no monitoring
required).
Designed for 12 V batteries from 1.6 to 25 Ah,
It can also provide a maintenance charging up to 80 Ah.
Optimised maintenance charge, the charger can remain
permanently connected for example whilst a vehicle is not in use
over the winter. The «Auto Restart» function means that the charger
will memorise the settings and restart automatically in the event of a
power cut.
IDEAL FOR MOTORBIKES
Protection of the vehicle’s on-board electronics: protection against short
circuits, polarity reversal and overcharging. Spark prevention system.
Automatic stand-by mode if the battery is disconnected.
INTEGRATED PROTECTION
• Compact design, light and portable.
• Connection with quick connector.
• Shock-resistant housing, resistant to water ingress (IP44).
ERGONOMIC
www.gys.fr
PLUG & PLAY SYSTEM
Simplied interface to prevent user errors. When
connected and if the battery voltage is over 7 V, the
ARTIC 800 instantly launches the charge without user
intervention.
1 2 3
FLEXIBLE SUPPLY
The ARTIC 800 runs on a single phase power supply between 100 to 240 V.

Summary of content (1 pages)