Datasheet


50 / 60 Hz

Icharge

V

Charge

Maintenance
Ondulation/
Ripple
Charging
curve


kg

mm

mm
IP


220-240 V AC 195 W 12 A 12 V 20 < 250 Ah 20 < 330 Ah
<0.4 Ah/
month
<100 mV
Rms
IU
0
U 8 step 1.1
221 x 111
x 58
195 x 365
x 70
Automatic
>2V
IP 65 2 m
GYSFLASH 12.12
MADE in CHINA
- EN 60335-2-29
Ref. 029392
• The 8 step charging curve ensures maximum battery performance and longevity.
• External temperature sensor, for an optimal battery charge whether it’s summer or
winter. The charger adjusts the charging curve depending on ambient temperature.
• It recovers deeply discharged batteries >2V (SOS Recovery ).
HIGH PERFORMANCE CHARGE
BATTERY
CHARGER
12V
The GYSFLASH 12.12 is specically designed to charge all types of’ 12V batteries such as cars, utility
vehicles, motor homes, buses or commercial vehicles. It features an 8 step intelligent charging curve for
an optimal charge; as well as a «Supply» mode to support and maintain showroom vehicle batteries.
1
Analysis
2
Recovery
3
Test
4
Desulfation
5
Charge
6
Absorption
7
Refresh (option)
8
Floating charge
• Designed for 12 V batteries from 1.2 to 250 Ah, or for maintenance charging up to 330 Ah.
• 2 charge modes for maximum versatility :
- AGM : Charge mode for cold weather (less than 5°C) and for Start & Stop batteries (EFB & AGM).
- Refresh : Recovers deeply discharged batteries.
• Supply mode
, transforms the charger into a stabilised power supply :
- maintains battery health during vehicle demonstrations (showroom) .
- preserves memory settings during battery replacement.
• Optimised maintenance charge, the charger can remain plugged in indenitely during
winter to maintain the health of the battery. «Auto Restart» feature so the charger can
restart automatically with the right settings after a power cut.
IDEAL FOR CARS AND 12V COMMERCIAL VEHICLES
• Protection of the vehicle’s on-board electronics: protection against short circuits, polarity
reversal and overcharging. Anti-spark technology.
• Automatic stand-by mode if the battery is disconnected.
• Integrated temperature probe to prevent internal electronics’ overheating.
• Simplied interface to prevent user error.
SAFETY / PROTECTION FOR VEHICLE ELECTRONICS
• Ultra-compact design, light and portable.
• Resistant to dust and water ingress (IP65 - not waterproof).
• Can be attached to a wall.
ERGONOMIC
www.gys.fr
1
2
3 4
5
6 7
8
REFRESH
U
I
Supplied with :
Clamps
(45 cm)