Datasheet

07/03/2016
MADE in FRANCE
- EN 60335-2-29
EN
DIAG-STARTIUM 60-12
www.gys.fr
CHARGER
STARTER
BSU
12V
Ref. 026513
The DIAG-STARTIUM 60-12 is a 3 in 1 advanced battery Charger, Starter, and Battery Support Unit that
will satisfy all the needs of the modern workshop.
20-900 Ah
340 A
CHARGE
Charge all battery types : Select the charging curve for the battery
type - Liquid, Gel, AGM - or if this is not known select the Universal
Mode which will ensure a safe change for any of these battery types.
Charge to 100% safely: The advanced multi-stage charger will
charge to 100% and does nbv ot require supervision nor the battery
to be removed from the vehicle. At the end of the charge, the charger
enters a oat mode to maintain the battery at 100%.
Smart : This device permanently analyses the health of the battery
and automatically adjusts the output voltage. The voltage and the
percentage of charge are displayed in real time on the digital screen.
Protection for the vehicle electronics: No need to disconnect the
battery from the vehicle. No risk of sparks, there is no voltage at the
clamps when they are not connected to a battery.
Charging a deeply discharged battery: The DIAG-STARTIUM can
charge batteries discharged to as low as 1V. This is not possible if the
battery is damaged.
TIMER : Function which ensures safe charging when charging deeply
discharged batteries (< 1V).
SOS RECOVERY : Enables the recovery of sulfated batteries.
Automatic start : A high power starter with advanced protection for
vehicle electronics. It will automatically start sending current to the
battery when the starter function of the car is being activated. The
remote control is not required anymore.
Smart start : The DIAG-STARTIUM will automatically detect damaged
or badly sulfated batteries. In this event it will not deliver current in
order to protect the vehicle electronics.
Battery support: DIAG-STARTIUM 60-12 provides up to 60A support
during diagnostic work. Select the DIAG+ function to set the voltage
(range 12-15V) to meet manufacturers’ requirements.
Auto restart defaulting to the last settings used.
Alternator test function to facilitate repair work.
Fault codes displayed on the digital screen for simple troubleshooting.
Delivered with :
• 2.3m Cables
• Insulated clamps
ADDITIONAL FEATURES
12V 12V
100%
>1V
DIAG +
I1
I
60335-2-29
A
A
1v/c
A
0v/c
Fuse
IP
mm

mm
kg
50/60hz
230V 16A 2700W 12V 20-900Ah
4+Start 5-15-30-60
340 460 200A 21
475x520x900 360x360x900 34
START