Datasheet

26/08/2021
MADE in FRANCE
- IEC 60974-1
I
2
MAX
SYNERGIC
SEPARATE
CABLE GUN
U
2
V
A
I RMS
A
50/60hz
ACIER/
STEEL
ALU
cm/kg
90 V - 240 V 1~ 13 000 A -
automatic
-
50>200 5
-
OK OK
21x24x36
/ 14
FV
GYSPOT ALU PRO FV
SPOT WELDING
MACHINE
Ref. 021990
The GYSPOT ALU PO FV is designed specically to
perform dent pulling on ALUMINIUM.
Using M4 studs, this device allows eliminating the bump
and impacts (door panel, hood, ...) without stripping.
CHARACTERISTICS
TECHNOLOGIES :
www.gys.fr
Micro-processor controlled with digital display
- Voltage (set from 50 V to 200 V).
- Power (set from 0 to 10).
- Detection of stud presence on holder.
Capacitors discharge (66 millifarad) :
Fast welding (3 millisecond).
Automatic gun:
The gun has no trigger; the welding is automatic
when the tip slides into the gun. The earth terminals
are integrated to the gun.
Included:
- Automatic gun with 3 earth terminals
included.
- Alu box standard.
- Chuck for Ø 4 mm studs.
This device works on power sources
between 85 and 265V.
Thanks to the Flexible technology, the
Gyspot ALU PRO FV works on
either 230V-2A or 110V-5A sockets.
This device also has reinforced
protection against overvoltage,
factory tested up to 400V.
3 stabilizing brass
rods for improved
gun stability whilst
welding.
The earth contact
has never been as
e󰀩cient as it is now !
M4 studs welding by capacitors discharge.
PROLINER ALU PRO FV SPEEDLINER ALU PRO FV
Ref. 035836 Ref. 036055