Datasheet

09/07/2021
MADE in FRANCE
- EN 62135
www.gys.fr
GYSPOT 100R.C
Spots/min
(max)
I RMS U
0
Cables
100%
CU
50/60hz

2.5+2.5
Liquid / Air
Cooled
m Ø mm²
3 x 400V
32A (D)
40A (D)
50A (D)
2
6
10
10 000A 16V 3+3 1.5+3
Air 2.5
200
OK
70x99x208
cm
103
kg
Air 3
150
- 8
4x6
H07RNF
: 300 daN
10 000A
RC3
051089
RC2
051072
RC1
051065
160
57 mm
80
34
106 mm
450 mm
220
120
SPOT-WELDING
EQUIPMENT
INCLUDED
Monopoint/Spot welding
049291
Spotter Box Pro
050075
Inertia hammer
049482 + 049802
Ref. 019928
The GYSPOT 100R-C is a spot welder inverter type air cooled blown. This spotter allows the welding of galvanized
steels and high strength steels. The clamping force to the electrodes can reach 300 daN and the eective welding
current can reach 10 000 A (R.M.S. value).
GYSPOT 100R-C has the traceability of welding spots.
Ideal clamp for all types of metal works
• Lightweight and easy to handle: Weight : 4 kg (with C1 arm).
• Single-sided welding tool with 3 meter cable:
spot hammer welding, stud/rivet/ring welding, carbon shrinking
• Accessory box
• Support cable bracket with a telescopic arm
• Control display 6”
• Welding current:
- High welding current 10 000 A
- Digital display of the actual current value
- Sound alert if the welding current is too low
- Constant current control
• Electrode force:
- Electrode force control
- Digital display of the actual electrode arms force
- High clamping force: 300 daN with at 7 bar
- Sound alert if the actual clamp force is too low
• User friendly: Large display (6”), with intuitive menus.
• Saving of user welding parameters.
• Easy: Only 2 parameters to be selected
(thickness and steel sheet).
• Record on SD card of the characteristics of each welding
spot performed.
• Restoration on any PC of the reports saved on the SD card.
DESCRIPTION
PERFORMANCE
MACHINE INTERFACE
TRACEABILITY