Quickguide for menus

ManualsBrandsGys ManualsCAR BODY MACHINESGYSPOT INVERTER BP. LX

GYS Welding units – Battery chargers MENUS QUICKGUIDE Page 1

QUICKGUIDE FOR GYSPOT BP, PTI and 100R MENUS

General presentation of the keypad

1. Key : allows to come back at

any time to the NORMAL welding

mode.

2. Keys to navigate through the Menus

and select values.

3. Keys related to the saving of the

user welding parameters.

4. Keys related to the saving of

traceability reports.

General settings selection

Press the MODE key more than 2 seconds

Mode selection (3 choices)

Press the MODE key 1. STANDARD MODE (to use automatic adjustments)

2. MANUAL MODE (to use car maker data)

3. MULTI MODE (to specify the characteristics of each sheet)

This menu enables to select :

- the language (French, English, German, …)

- the date and time

- switch ON or OFF the BEEP alert

Press the UP and DOWN keys to select the

requested value. Press the MODE key to validate

the choice.

Summary of content (6 pages)

PAGE 1
GYS Welding units – Battery chargers MENUS QUICKGUIDE Page 1 QUICKGUIDE FOR GYSPOT BP, PTI and 100R MENUS General presentation of the keypad 1. Key : allows to come back at any time to the NORMAL welding mode. 2. Keys to navigate through the Menus and select values. 3. Keys related to the saving of the user welding parameters. 4. Keys related to the saving of traceability reports.
PAGE 2
GYS Welding units – Battery chargers MENUS QUICKGUIDE Page 2 Tool selection Press the ESC key 1. C clamp 3. X clamp 2. C clamp adjustment (to change arms) 4. X clamp adjustment (to change arms) 5. Single sided gun Navigating through welding parameters (3 choices) – Example in STANDARD mode The selected parameter is highlighted in white 1. Sheet thickness 2. Type of steel 3.
PAGE 3
GYS Welding units – Battery chargers MENUS QUICKGUIDE Page 3 MANUAL mode In this mode, the welding parameters can be entered manually by the user : Welding current ( I ) : from 1 kA to 13 kA Welding time ( T ) : from 80 ms to 850 ms Electrode force ( F ) : from 100 daN to 550 daN Type of arm : from C1 to C5, from X1 to X10.
PAGE 4
GYS Welding units – Battery chargers MENUS QUICKGUIDE Page 4 Saving user welding parameters Press the appears. key : the screen shown left Press the UP and DOWN keys to select a letter or a number : letters from A to Z, and numbers from 1 to 9 can be selected. Use the ( + ) and ( - ) keys to enter the next character, or come back to the previous one. Pressing the name. key validates the program Note : Pressing briefly the erase the complete name.
PAGE 5
GYS Welding units – Battery chargers MENUS QUICKGUIDE Page 5 Saving a report Press the key : the screen shown left appears on the screen. Press the UP and DOWN keys to select a letter or a number : letters from A to Z, and numbers from 1 to 9 can be selected. Use the ( - ) and ( + ) keys to enter the next character, or come back to the previous one. Note : Pressing the the complete name. key allows to erase Pressing the key saves the report name and starts the record.
PAGE 6
GYS Welding units – Battery chargers MENUS QUICKGUIDE Page 6 Resuming an existing report key : the screen shown Press the left appears. Type the name of the report corresponding to the job the user wants to resume. Press the key to start recording. The name of the report appears on the top left hand side of the screen. The characteristics of the welding spots performed from now on will be saved after the previous ones. No data is erased.