Datasheet

Laget i Frankrike
- EN 60974-1
NEOFEED 4W
REEL FOR PULSED
MIG-MAG
GENERATOR
Ref. 014527
MIG/MAG:
- steel and stainless steel wire : Ø 0.6 to 1.6 mm
- aluminium wire: Ø 0.8 to 1.6 mm
- CuSi and CuAl wire: Ø 0.8 to 1.2 mm
- Cored wire: Ø 0.9 to 2.4 mm
MMA DC / Pulse: basic, rutile and cellulosic electrodes (up to Ø 6 mm).
TIG DC LIFT / PULSED.
Supplied without accessories
MULTI-PROCESS WELDING
ROBUST AND MOBILE
Reinforced metal case & non slip rubber pads.
IP23 casing.
Interconnection cables (air or water cooled) up to 20m (optional).
Remote settings of the wire feeder using the 2 optional remote controls (digital or analogical).
4 rings for slinging.
Designed to work exclusively with NEOPULSE power sources, the separate NEOFEED 4W wire feeder allows
for very precise conguration and control of the welding cycle. Its intuitive digital interface makes it easy to
act on the welding parameters. Its ultra-precise drive system oers industrialists maximum productivity on
all types of materials.
www.gys.fr
MAXIMUM PRODUCTIVITY
Designed for heavy and demanding industrial applications:
High productivity thanks to its high duty cycle (500 A @ 60%).
Powerful electronically controlled wire feed motor (100 W) with 4 active drive rolls.
Compatible air and liquid cooled torches.
SMART
SYNERIC mode: After entering 3 data (material/gas torque and wire diameter),
NEOFEED automatically determines the optimal welding conditions and allows the adjustment
of settings (wire feed speed, voltage, current, arc length).
ADVANCED INTUITIVITY
New user friendly interface focused on welders’ navigation habits.
2 control knobs for easy and intuitive navigation of the menus.
Complete update of the machine and synergies by USB key.
Storage of 500 welding programs (can be saved on USB stick).
Displays current/voltage during and after welding (WPS/PQR)..
Choice of the main parameter to display on the screen (wire speed, average welding current, etc.).
Internal lighting of the motorized roll and wire reel.
Viewing window on trapdoor to check the consumption of the ller wire.
Compatible with torch Push-Pull (24V / 42V).
Integrated torch support.
OPTIMISED MIG/MAG SETTINGS
Welding processes: Manual, Dynamic STD, Pulse, Arc Module (hot/cold current variation)
Scoring modes: SPOT and DELAY.
Trigger management: 2T and 4T.
Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Fill, Postgas, etc.
ACCURATE
Calibration of welding accessories and wire feeder speed, to adjust the displayed voltage measurement and rene the energy calculation.
Energy, display and energy calculation after welding according to EN1011-1, ISO / TR 18491 and QW-409.
Portability: load/save/transport from a USB key the user JOBS as well as the machine conguration.
Traceability: trace/record all welding steps, seam by seam, during industrial production within the framework of EN ISO 3834.
3 levels of user interface :
- Easy : simplied functionalities
- Expert: full display
- Advanced: full access to all parameters