Datasheet

21/03/2019
MADE in FRANCE
- EN 60974-1
www.gys.fr
U
1
TIG
EN60974-1
(40°C)
: cm/kg
CASE
: cm/kg
I
2
X%
(I2 max)
IA
(60%)
IA
(100%)
Protected & compatible
POWER GENERATOR
(+/- 15%)
14 - 100 V 400 A 25% 270 A 220 A
34 x 26 x 16 cm / 6,5 kg
45 x 35 x 20 cm / 8 kg
9 kVA max.
EXATIG
PLUGGED
LPM
25
20
15
10
5
Ref. 013780
The EXATIG is a high frequency (HF) generator for TIG welding on a range of DC current generators.
Optimized for the EXAGON 400 CC/CV. The EXATIG allows HF arc ignition, gas synchronization,
torch management and gas ow.
Extremely easy to use and operates directly from the
power source without the need for an auxiliary power
cable.
MMA welding can be done directly by disconnecting the negative
power cable and connecting the electrode holder to it, leaving the
ground clamp in place.
The connection with the EXAGON allows to obtain all the TIG
functions and to weld in HF or TIG Lift.
Functions :
Pre-gas/Post-gas: complete management of the welding cycle.
• TIG DC : continuous current for ferrous metals..
• TIG DC Pulse : reduces heat distortion of the workpiece. (Only on EXAGON 400
CC/CV).
2 types of start-up : HF (without contact) or LIFT (with contact) for electro-
sensitive environments.
2 trigger management: 2T and 4T.
Automatic detection of the torch : compatible with trigger, double button and
potentiometer torches.
Remote adjustment of the current with the potentiometer torch.
Settings :
- pre-gas / post-gas
- rise time
- welding current
- hot / cold current
- pulse frequency
- fading time
Fastening
trolley 10 m3
Ref. 037779
Gas extension
cable
Ref. 71850
Power cable
ref. 032446 (10m)
(x2)
Control cable
réf. 036925 (11m)
Control cable kit
réf. 036918
OPTIMISED FOR EXAGON
MMA
USER-FRIENDLY
Accessory
TIG
Can be positioned on
a trolley thanks to its
fasteners
(Option).
Adjust the gas ow rate
using the ow meter
The handle makes it easy
to use to move around
Reinforced bodywork
& rubber pads
Rear view of the product:
PORTABLE & ROBUST
EXATIG CONNECTION
ACCESSORIES
Connection to the
EXAGON (PLUGGED) :
- Operation indicator
light.
Power (+)
Power (-) Control
Ground (+)
Gas
Réf. 010925
HF starting for non-pulsed DC TIG welding from any current
generator. (PROGYS or other...)
COMPATIBLE WITH ALL DC GENERATORS
Features :
Pre-gas and post-gas xed but internally modiable.
2T/4T torch management
HF ignition
A owmeter is integrated into EXATIG giving the operator
the possibility to adjust the gas debit (argon) directly.
Possibility of ow adjustment: 5-25 LPM (litre per minute).
Arrête de lecture
Option