Datasheet

MADE in FRANCE
- EN 60974-1
TITAN 400 DC
   TIG  MMA
INTEGRATED
TECHNOLOGY
TIG - MMA U
0
  
IP
 
Protected
& compatible
power generator
(+/-15 %)
50/60 Hz A A A PULSE AID SR CEL
EN 60974-1
(40°C)
V mm² W cm kg
400 V - 3~ 32 3  400 5  400 0.1  2500 Hz
• • •
400 A @ 60%
360 A @ 100%
85 70/95 35 75 x 30 x 54 40 IP 23 30 kVA
TIG
DC - HF
THREE PHASE
3  400A
Ref. 013520
TIG DC : welding in continuous current.
TIG DC Pulse : reduces heat distortion of the workpiece.
3 special welding processes:
- SPOT mode: traditional spot welding before welding thin sheet metals.
- TACK mode: very precise spot welding function free of oxidation reducing the risk of heat
input causing deformation. The welding spots in TACK mode are invisible in the weld bead.
- E-TIG mode: ensures a unied weld bead width and consistant penetration regardless the
position of the torch in relation to the work piece (control of the welding energy).
2 types of Arc start-up: HF (without contact) or LIFT (with contact) for electro-sensitive
environments.
3 trigger modes: 2T, 4T and 4T LOG.
Automatic detection of the torch: compatible with trigger, double button and potentiometer
torches.
Supplied without
accessories
ACCESSORIES
OPTIMISED DC WELDING
STURDY
IP 23 classication for outdoor use.
Reinforced chassis & non-slip rubber pads.
2 steel handles for easy lifting or handling.
4 corner rings suitable for slinging the equipment.
The perfect solution for accurate welding of high alloy metals, the TITAN 400 power source with its high duty cycle
(400 A @ 60 %) is designed for the most demanding TIG and MMA welding applications. Its User friendly interface
enables easy setup with large and simple controls. Equipped with TACK mode and spot function, the TITAN 400 is the
preferred tool of the professional welder on pipework, tubular construction and stainless steel plate fabrications.
www.gys.fr
INTUITIVE
Displays current/voltage during and after welding (WPS/PQR).
JOB Save 50 programs for each process, for a perfect reproducibility of your
welds.
Remote control (optional pedal or manual).
Lockable keyboard to protect against misuse.
Intelligent cooling fan management system to minimise the power consumption
(stationary, off arc = 35 W), reduce dust absorption and noise.
«Connect 5» mode to trigger the machine from a automated controller or
interface (5 pre-saved program).
MMA WELDING
All the TIG welding settings are directly accessible with one
knob for simple operation. Large central control knob to
allow for « gloved» use.
ACCURATE
Calibration mode allows for the adjustment of the voltage and improves
the calculation of the energy.
ENERGY mode, display and calculation of energy after welding according
to the standards EN1011-1, ISO/TR 18491 and QW-409.
MMA: coated, rutile, basics and cellulosic electrodes (up to Ø 6 mm).
MMA Pulse: Developed for vertical welding to reduce «sagging» and optimise
penetration
MAIN MENU ADVANCED MENU
- pre-gas / post-gas
- upslope current
- welding current
- downslope time
- hot current
- pulse frequency
- cold current balance
- I start / t start
- I stop / t stop
- Shape of the pulse wave
- Spot welding duration in
pulse current or in continuous
current.
WCU 1kW C
013537
1000 W
5.5 l - 15 kg
Trolley 10m
3
037328
Cooling unit:
Foot pedal RC-FA1
045682
Manual RC-HA1
045675
Remote control:Torch ABITIG liquid - 450 W - 8 m:
Trigger
037359
Double button
037366
Filter
046580