Datasheet
13/03/2015
- EN 60974-1
MADE in PRC
NOVOMIG 160
ømm
ømm
équipé d’origine /
original equipement /
originalausstatung /
equipamiento de fabrica
EN60974-1
(40°C)
50/60hz
min
▷max
GAS
NO
GAS
100 200 300
Electronic
Control
IA
(60%)
X%
(I2 max)
cm/kg
Protected & compatible
POWER GENERATOR
(+/- 15%)
230V 16A
30
▷160A
0,6
-
1,0
0,9
-
1,2
-
0,6
-
0,8
0,8 70A
115A
20
%
34x54x45
25
4,5 kVA
www.gys.fr
1m
3
max
MIG-MAG
WELDING
MACHINE
30 160A
Ref. 012974
FEATURES
EASY AND FAST SETTING
EXAMPLE OF APPLICATIONS
WIRE REEL
PORTABLE
TORCH
2 IN 1
ELECTRICAL CONSUMPTION
No gas welding process allows :
• To weld with cored wire.
• To work outside without being disturbed by the wind.
• To easily carry the machine thanks to the No gas process (no gas bottle). Ideal for working in difcult access.
It is designed for repairing,
maintening and assembling steel,
stainless-steel and aluminium.
This MIG-MAG single phase welding machine is designed for welding steel, stainless-steel
and aluminium up to 160A. Easy to set up thanks to the SMART board. It is ideal for
maintenance work.
• Constant wire feeding thanks
to the 40W wire feeder motor
• Suitable for ø100 and 200mm
wire reels
• 2 front wheels
• Strap to fasten the gas
bottle
• Removable torch.
• Delivered with 2.2m earth
clamp and torch (regulator not
included)
• MIG-MAG for welding - ø0.6-
0.8-1.0mm
• NO GAS for welding outside -
Cored wire 0.9-1.2mm
Low consumption - 16A - 230V
With the Novomig no complicated adjustement.
Thanks to the Novo Controller board it is
easy to adjust the voltage (4 positions) and
the wire feeding speed.
Ideal setting indicated, just select the thickness
of the metal sheet to weld.
With its intuitive interface
setting up the machine takes
a couple of seconds