Datasheet

11/10/2017
MADE in FRANCE
- EN 60974-1
www.gys.fr
TIG
I2
EN60974-1
(40°C)
50/60hz
X%
(I2 max)
I2
(60%)
I2
(100%)
mm/kg
110 V - 1~ 32 A 5 - 180 A
40%
125 A 110 A
390 x 290 x 160 / 9
230 V - 1~ 16 A 5 - 220 A
35%
165 A 140 A
290
390
160
Designed for automated welding operations, the ORBITIG 200A is a welding machine operated by a CAN
Bus. With inverter technology it benets from the latest technical improvements in TIG welding. Compact,
it will perfectly t on robots, including on orbtital TIG welding machines.
2 types of strike
• HF without contact
• LIFT with contact for electro-sensitive environments
«HEIGHT CALIBRATION» mode
During the mass production of pipes, it is important to make
sure that there is a constant height between the electrode
and the pipe before starting the weld. To do so the welding
machine features a vertical repositioning function which puts
the electrode at a set height after contact.
«TRACKING» mode
The welding machine receives and updates the current
setpoint in realtime.
FEATURES
CAN OPEN communication protocol
Compliant with the CiA (CAN In Automation) requirements,
this system offers a fast and reliable communication solution.
Highly precise and instantaneous data exchange
• Welding status (ARC ON / ARC OFF).
• Measure voltage and current (for energy control and arc
length).
• Protection mode in case of overvoltage, undervoltage, short
circuit or arc stop.
• Thermal protection information.
Flexible Voltage power supply
This 220A machine will work on a single phase power supply
from 85 to 265 V.
PFC technology (Power Factor Correction)
The electrical power supply usage is optimised for up to 30%
energy savings.
FV
PFC
ORBITIG 200A WELDING MACHINE
WELDING
MACHINE
5
▷220A
Ref. 012448
connector DF70.21
Secondary regulation - Regardless of the input
voltage and changes in distance between the electrode
and the metal, the machine ensures a stable arc for
optimum quality.
Secondary regulation