Instructions / Assembly

Observe Flame Height When Lit: The burner will display blue and yellow ﬂames. These ﬂames should be

a blue / yellow color between 1~2 in. height (See below). These ﬂames should not be yellow or produce

thick smoke. This would indicate an obstruction of airﬂow through the burners. The ﬂames should be blue

with straight yellow tops.

Yellow

Light Blue

Blue

Good Bad

CARE AND MAINTENANCE

To enjoy the outstanding performance from your ﬁre pit, make sure you perform the following activities on a

regular basis:

1. Use warm soapy water for cleaning. Never use ﬂammable or corrosive cleaning agents.

2. While cleaning the ﬁre pit, make sure to keep the area around the burner dry at all times. DO NOT

submerge the control valve assembly. If the gas control is submerge in water, DO NOT use it. It must

be replaced.

3. Air ﬂow must be unobstructed. Keep controls, burner, and circulating air passageways clean. Signs of

possible blockage include:

(1). Gas odor with extreme yellow tipping of ﬂame.

(2). Fire pit does NOT reach the desired temperature.

(3). Fire pit ﬂame is excessively uneven.

(4). Fire pit makes popping noises.

(5). Spiders and insects can nest in burner or oriﬁce. This dangerous condition can damage ﬁre pit and

render it unsafe for use. Clean burner holes by using a heavy-duty pipe clearer. Compressed air

may help clear away small particles.

4. Carbon deposits may create a ﬁre hazard. Clean burner with warm soapy water if any carbon deposits

develop.

5. Cover your ﬁre pit with an outdoor weather cover when not in use to protect it from the elements.

NOTE: Always allow ﬁre pit to cool COMPLETELY before you cover the ﬁre pit with an outdoor weather

cover or you attempt the service or maintenance.

Or 1-888-733-8169 Toll free

Monday-Friday 9AM - 5PM EST

For any missing or damaging parts, hardware, or any other problems, WELCOME to email us at:

SERVICE@RILYSON.COM