Instructions / Assembly

ManualsBrandsGymojoy ManualsOutdoor GlidersValenta 2-Person Light Gray Wicker Outdoor Glider with Baby Blue Cushion

Table Of Contents

空白页面

For any miss

ing or damaging parts, hardware,or any other problems, WELCOME to

email us at:

SERVICE@RILYSON.COM Or 1-888-733-8169 Toll free

Monday-Friday 9AM - 5PM EST

* Don't fully tighten all the bolts till the very end!

PRE-ASSEMBLY PREPARATION:

--- Please read through the instructions before beginning assembly.

--- Clear out the space for assembly and lay out all of the parts based on the Parts

List, extra room will allow you to easily determine if all the pieces are present.

--- Keep small parts and pieces away from children until fully assembled.

ASSEMBLY INSTRUCTION

Summary of content (5 pages)

PAGE 1
ASSEMBLY INSTRUCTION For any missing or damaging parts, hardware,or any other problems, WELCOME to email us at: SERVICE@RILYSON.COM Or 1-888-733-8169 Toll free Monday-Friday 9AM - 5PM EST * Don't fully tighten all the bolts till the very end! PRE-ASSEMBLY PREPARATION: --- Please read through the instructions before beginning assembly. --- Clear out the space for assembly and lay out all of the parts based on the Parts List, extra room will allow you to easily determine if all the pieces are present.
PAGE 2
A1 Left Arm 1PCS A2 Right Arm 1PCS B Seat M6*35mm M6*24mm D Base 1PCS E U-Shaped Fitting 1PCS M Nut 4PCS 4PCS 4PCS G 6PCS M6*40mm H 2PCS M6*95mm M6*45mm I F 1PCS C Back 1PCS J N Wrench 1PCS 2PCS K Washer O Spanner 1PCS 18PCS L Spring Washer 4PCS P Back Cushion 1PCS Q Seat Cushion 1PCS
PAGE 3
STEP 1 A1 B 6*35 mm G K Connect left arm A1 and seat B with G and K. Don't tighten bolts! STEP 2 C 6*35 mm G K K H 6*40mm KH Connect chair back,seat and left arm with G,H and K. Don't tighten bolts! STEP 3 KG K G 6*35 mm A2 Connect chair back,seat and right arm with G and K.
PAGE 4
STEP 4 C JK KJ 6*95mm A1 A2 B Connect left ,right arms and back with J and K. Don't tighten bolts! I STEP 5 6*45mm K K L M Connect U shaped fitting and base with I, K,L and M. Please tighten these bolts! STEP 6 F F F F 6*24MM Connect U shaped fitting,left and right arms with F. Tighten all the bolts! Put seat and back cushions on the chair.
PAGE 5
Notice NOTICE Floor 1.Buckle the chair upside down on the floor. 2.Put the base in the chair. 3.Connect the base,left and right arms with Bolts. 4.