Instructions / Assembly
STEP 6:
Turn over the table. put the volcanic stone (M) around the buner.
STEP 7:
M
G
Place the gas cylinder into the cylinder holder (figure 9), secure the cylinder
by tightening clockwise the bolt (figure 10) found on the cylinder holder, so the cylinder
cannot move from side to side or fall down.
The knob on the control panel is tunred all the way to the "OFF" position (figure 11)
when the fire pit is not in use.
Figure 8
Figure 9
Black handle
Figure 10
Figure 11
10
-
+
AAA