Instructions / Assembly

ManualsBrandsGymojoy ManualsOutdoor GlidersStLouis 2-Person Brown Wicker Outdoor Glider with Blue Cushion

Table Of Contents

Foranymissinghardware,damagedpartsandotherproblems.

WELCOMEtoemailusat:service@behousewell.com

Orcallat1‐

888‐733‐8169Tollfree

Between9AMand5PMEasterntime,MondaythroughFriday

*Don't fully tighten all the bolts till the very end!

PRE‐ASSEMBLYPREPARATION:

‐‐‐ Pleasereadthroughtheinstructionsbeforebeginningassembly.

‐‐‐ Clearoutthespaceforassemblyandlayoutallofthepartsbasedon

thePartsList,extraroomwillallowyoutoeasilydetermineifallthepieces

arepresent.

‐‐‐ Keepsmallpartsandpiecesawayfromchildrenuntilfullyassembled.

AssemblyInstructions

2024.1.25

Summary of content (7 pages)

PAGE 1
Assembly Instructions For any missing hardware, damaged parts and other problems. WELCOME to email us at: service@behousewell.com Or call at 1‐888‐733‐8169 Toll free Between 9AM and 5PM Eastern time, Monday through Friday *Don't fully tighten all the bolts till the very end! PRE‐ASSEMBLY PREPARATION: ‐‐‐ Please read through the instructions before beginning assembly.
PAGE 2
Part no. Part QTY A Left arm 1 Image Part no.
PAGE 3
Step 1: Attach left arm A to back C with 2pcs bolts I and 2pcs washers K, using Allen wrench N. Note: Don’t fully tighten the bolts. Step 2: Attach right arm B to back C with 2pcs bolts I and 2pcs washers K, using Allen wrench N. Note: Don’t fully tighten the bolts.
PAGE 4
Step 3: Attach seat D to arms A&B with 4pcs bolts J and 4pcs washers K, using Allen wrench N. Note: Don’t fully tighten the bolts. Step 4: Attach seat D to back C with 2pcs bolts J and 2pcs washers K, using Allen wrench N. Note: Don’t fully tighten the bolts.
PAGE 5
Step 5: Attach support bar G to base F with 2pcs bolts I and 2pcs washers K, using Allen wrench N. Note: Don’t fully tighten the bolts. Step 6: Attach support bar H to base F and support bar G with 3pcs bolts I and 3pcs washers K, using Allen wrench N. Note: Don’t fully tighten the bolts.
PAGE 6
Step 7: Attach U-Shape Fitting E to arms with 4pcs bolts J and 4pcs nuts L, using Allen wrench N and Wrench O. Note: Don’t fully tighten the bolts. Step 8: Attach the assembled base F to U-Shape Fitting E with 4pcs bolts J, 8pcs washers K, 4pcs spring washers M and 4pcs nuts L, using Allen wrench N and Wrench O. Note: Please fully tighten all the bolts.
PAGE 7
Step 9: Put seat cushion P and back cushion Q onto the seat. Assembly is now complete and the product is ready for use.