Instructions/Assembly Guide

PLANNING ASSEMBLY
GYM RAX® INSTALLATION | STORAGE & SUSPENSION SYSTEMS 5 REVISON 21A
ESTIMATED ASSEMBLY TIME
15-20 minutes per bay
REQUIRED TOOLS AND SUPPLIES
6mm Allen key
17mm wrench
Tape measure
REQUIREMENTS
Flooring surface for Streamline Storage should be flat, level, and
reasonably firm. Carpet with a high pile or cushion may not be
suitable. Rubber gym floorings are ok.
Place Streamline Storage against a wall
Torque fasteners to 20-25 ft-lb
Do not the exceed maximum overall storage capacity of 550 lb per
Streamline bay
Do not the exceed maximum capacity of Rax storage components.
The Free Weight, Trough, and Universal Bar maximum capacity on
Streamline Storage is 300 lb each. The Universal Rax is 200 lb.
Do not use a Streamline Storage structure as an anchor for training
with bands, straps, ropes, etc.