Instructions/Assembly Guide

PEG STORAGE ATTACHMENT
GYM RAX® INSTALLATION | STORAGE & SUSPENSION SYSTEMS 14 REVISON 21A
STEP 3B – ADD STORAGE ATTACHMENTS - PEGS
A variety of PEG Storage products are available depending on the intended product
storage. All PEG Storage employs the same hook design to attach to the RAX Universal Bar.
A) Tilt the Peg upward and insert the rounded hook of the Peg between the bars of the
Universal Bar.
B) Lift the rounded end of the Peg hook to mate with the upper bar. Continue to hold the
Peg against the bar and rotate the Peg downward until at rest against the lower bar.
C) The Peg will now be securely mounted to the Universal Bar. Adjust the position as
necessary so the Peg is level, well seated, and positioning appropriately across the bar.
TILT PEG UPWARD AND INSERT
ROUNDED HOOK BETWEEN BARS
LIFT THE ROUNDED HOOK INTO
THE UPPER BAR AND ROTATE
THE PEG DOWNWARD
CONTINUE ROTATING UNTIL PEG
IS AT REST AGAINST LOWER BAR