Instructions/Assembly Guide

CROSSMEMBER ATTACHMENT
GYM RAX® INSTALLATION | STORAGE & SUSPENSION SYSTEMS 11 REVISON 21A
ADD CROSSMEMBER SPACER TO ADD-ON POST OF EQUAL HEIGHT
ADD CROSSMEMBER SPACER TO ADD-ON POST OF NON-EQUAL HEIGHT
A) The Crossmember CM of the add-on bay overlaps the Crossmember of the base bay
on the rear of the shared Post
B) The Crossmember Spacer H3 is required on the attachment of the Crossmember to the
add-on post when the add-on bay is of equal height to the base bay.
C) The Crossmember side screw will not be used on the Crossmember of the add-on bay
at the shared Post.
ADD CROSSMEMBER SPACER
ON ADD-ON POST
*EQUAL HEIGHT ADD-ON ONLY
RIGHT
ADD-ON BAY
LEFT
BASE BAY
DO NOT ADD SIDE SCREW
TO ADD-ON CROSSMEMBER
ON SHARED POST
REAR VIEW
LEFT
BASE BAY
RIGHT
ADD-ON BAY
ADD-ON POST