User Manual

-
27
-
Recommended separation distances between portable and mobile RF communications device and TC200
TC200 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user
of TC200 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications device (transmitters) and TC200 as recommended below, according to the maximum output power of the
communications device.
Rated maximum output power
of transmitter
(W)
150 kHz to 80 MHz
=1.2 
80 MHz to 800 MHz
=1.2 
800 MHz to 2.5 GHz
=2.3 
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures, objects and people.