Datasheet

PSWEXT-V
Analog
connector
＋
－
16
4
Output
Terminal
2 core shielded
wire or twisted
pair
PSWEXT-R
Analog
connector
7
6
Output
Terminal
2 core shielded
wire or twisted
pair
PSWSwitch
Analog
connector
24
2
Output
Terminal
2 core shielded
wire or twisted
pair
PSWSwitch
Analog
connector
12
2
Output
Terminal
2 core shielded
wire or twisted
pair
PSW
DMM
Analog
connector
16
10
Output
Terminal
VMON
0
→ 10V
PSW
DMM
Analog
connector
16
11
Output
Terminal
IMON
0
→ 10V
H.
I.
EXTERNAL ANALOG REMOTE CONTROL
On the rear panel of the PSW-Series power supply, a 26-pin Analog
Control connector is available to perform lots of remote control and
monitoring functions. The output voltage and current can be set using
external voltage or resistance.
The power supply output on/off and main power shut-down can also
be controlled using external switches. This Analog Control Connector
is complied with the Mil 26 pin connector (OMRON XG4 IDC plug)
standard.
External Voltage Control of the Voltage Output
External Resistance control of the Voltage Output
External Switch Control of the Output On/Off
External Switch Control of the Main Power Shut-down
External DMM Monitoring of the Output Voltage
External DMM Monitoring of the Output Current
USING THE RACK MOUNT KIT
The Rack Mount Kit of the PSW-Series supports both EIA and JIS
standards. A standard rack can accommodate 6 units of type I (360W
Output Power) models, or 3 units of type II (720W Output Power)
models, or 2 units of type III (1080W Output Power) models.
The Rack Mount Kits for EIA standard (P/N: GRA-410-E) and for JIS
standard (P/N: GRA-410-J) are provided as optional accessaries for
the PSW-Series.
Rack Mount Kit GRA-410-J (JIS)
Rack Mount Kit GRA-410-E (EIA)