User manual

ManualsBrandsGW INSTEK ManualsLaboratory & Bench PSUsBench PSU (adjustable voltage) PSW160-7.2A 0 - 16 Vdc 0 - 7.2

CONFIGURATION

97

F-93

0 = Master/Local

1 = Master/Parallel1

2 = Master/Parallel2

3 = Slave/Parallel

4 = Slave/Series

External Out

Logic

Sets the external logic as active high or low.

F-94

0= High ON, 1 = Low ON

Power Switch Trip

Turns the power off if enabled when the

protection settings are tripped.

F-95

1 = Disable, 0 = Enable

Calibration

Programmable

Calibration

The calibration password is used to access the

local mode calibration or other special

functions. The password used determines

which function is accessed. Please see your

distributor for details.

F-00

0000 ~ 9999

Setting Normal Function Settings

The normal function settings (F-01~F-61, F-

88~F-89) can be easily configured with the

Function key.

 Ensure the load is not connected.

 Ensure the output is off.

Note

Function setting F-89 (Show Version) can only be

viewed, not edited.

Configuration settings F-90~F-95 cannot be edited

in the Normal Function Settings. Use the Power

On Configuration Settings. See page 99 for details.