User manual

PSW Series User Manual
140
3. The display will show F-01
on the top and the
configuration setting for
F-01 on the bottom.
4. Rotate the voltage knob to change
the F setting until to F-00 is shown.
Voltage
5. The display will show F-00
on the top and the 0000 for
the Password for F-00
6. Use the current knob to enter the
Password for the F-00 setting. The
Password is “5 0 0 4”.
Current
7. Press the Voltage knob to enter the
Calibration Mode. SF-1 will be
displayed when successful.
X for don’t care
Voltage
8. Rotate the voltage knob to change
the SF setting until to SF-2 is
shown.
Voltage