User manual

COMMUNICATION INTERFACE
129
 ^j can be used as the terminal character
when entering the queries/commands from
a terminal application.
Note
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.
Web Server Remote Control Function Check
Functionality
check
Enter the IP address of the power supply in a
web browser after the instrument has been
configured as a web server (page 126).
http:// XXX.XXX.XXX.XXX
The web browser interface appears.
Note
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.
Socket Server Function Check
Background
To test the socket server functionality, National
Instruments Measurement and Automation
Explorer can be used. This program is available
on the NI website, www.ni.com., via a search
for the VISA Run-time Engine page, or
“downloads” at the following URL,
http://www.ni.com/visa/
Requirements
Firmware: V1.12
Operating System: Windows XP, 7
Functionality
1. Start the NI Measurement and Automation