Datasheet

POWER SUPPLIES
D10
Made to Measure. Good Will Instrument Co., Ltd.
ORDERING INFORMATION
FEATURES
PSM-Series
* Single Output Dual Range Max. 200W
* High Resolution: 1mV/1mA
* Stable & Clear Power: 0.01% Load/Line
Regulation, 350 Vrms Ripple
* 100 Sets Memory
* Auto Step Running With Time Setting
* Safety Design: OVP, OCP & OTP ; Output
ON/OFF Control(OCP Provides Delay Setting
to Prevent Trip of High Start-Up Current)
* Self-Test and Software Calibration
* High Visible Vacuum-Fluorescent Display
* Front and Rear Output Terminal
* Standard Interface : RS-232C, GPIB
* Option : European Jack Type Terminal
Patent No: ZL 03 3 01174.5
ORDERING INFORMATION
SPECIFICATIONS
PSM-2010 200W Single Output, Programmable Power Supply
PSM-6003 200W Single Output, Programmable Power Supply
PSM-3004 120W Single Output, Programmable Power Supply
Option
Opt. 01: GRA-407 19", 4U Rack Mounting ( 19" , 4U )
RESOLUTION
ACCURACY
TEMPERATURE COEFFICIENT PER C (% of Output + Offset)
POWER SOURCE
INTERFACE
ACCESSORIES :
DIMENSIONS & WEIGHT
DC OUTPUT
CONSTANT VOLTAGE OPERATION
CONSTANT CURRENT OPERATION
TRANSIENT RESPONSE
COMMAND PROCESSING TIME
VOLTAGE PROGRAMMING RESPONSE TIME (for resistive load)
STABILITY (% of output + offset)
MEMORY
Programming
Voltage
1mV 1mV 2mV
Current 1mA 0.5mA 0.5mA
Readback
Voltage
0.5mV 0.5mV 1mV
Current 1mA 0.1mA
0.5mA
Front Panel
Voltage
Voltage
1mV
Current
Current
1mA(<10A),10mA( 10A)
10mV
10mA
Programming
OVP/OCP
Voltage
0.05% + 10mV
Current 0.2% + 10mA
Readback Voltage
0.05% + 5mV
Current 0.15% + 5mA
OVP/OCP
Voltage
0.1% + 10mV
Current
0.4% + 10mA
Voltage
Voltage
0.01% + 3mV
0.02% + 1mV
Current
Current
0.02% + 3mA
0.1% + 1mA
AC 100V/120V/220V 10% , 230V : - 6% ~ + 10% , 50/60Hz
User manual x 1, Power cord x 1,
Test lead GTL-104 x 1 , European test lead GTL-204 x 1,
GTL-201A x 1 , GTL-202 x 1 Ground lead (European terminal) Sense lead (European terminal)
230(W) x 140(H) x 380(D) ; Approx. 10kg
PSM-2010 PSM-3004 PSM-6003
0 ~ 8V/20A
0 ~ 20V/10A
0 ~ 15V/7A 0 ~ 30V/6A
0 ~ 30V/4A 0 ~ 60V/3.3A
Regulation
Low Range
High Range
+(% of output + offset)
Load regulation < 0.01% + 2mV
Line regulation < 0.01% + 2mV
Ripple & Noise
< 350 Vrms/3mVpp < 350 Vrms/2mVpp <50V:<500 Vrms/3mVpp
>50V:<1mVrms/3mVpp
Regulation
+(% of output + offset)
Load regulation < 0.01% + 250 A
Line regulation < 0.01% + 250 A
Ripple & Noise
< 2mArms
Voltage Up
Voltage Down
< 50 sec. ( for output to recover to within 15mV following a change
in output current from full load to half load )
100 ms
95 ms
45 ms
30 ms
450 ms
50 ms
20 ms
45 ms
400 ms
80 ms
100 ms
30 ms
450 ms
Full Load
No Load
Full Load
No Load
100 sets
Standard RS-232C , GPIB
PROGRAMMABLE DUAL-RANGE D.C. POWER SUPPLY
The PSM Series is single output / dual range, 120 or 200W, programmable linear DC power supply.
OVP, OCP, OTP, and output On/Off control protect PSM and loads from unexpected conditions. High
resolution, high regulation, low ripple are maintained at 1mV/1mA, 0.01%, and less than 350 Vrms,
respectively. VFD panel with simultaneous view of output and parameter setting provide comfortable
operation. Configuration is simplified with output limit store/recall function and Auto step running
feature for continuous testing. Self-test and software calibration features reduce maintenance overhead.
SCPI command set and Labview driver access through RS-232C or GPIB interface provide remote
control and ATE software development capability. The PSM Series is an ideal choice for high precision,
high reliability application such as QA verification and R&D.
Optional Accessories
GTL-232 RS-232C Cable, 9-pin Female to 9-pin , Null Modem for PC Computer
Store/Recall
Rear Panel