User Manual

PSB-2000 Series User Manual
66
Procedure
1. Press the MENU key until menu number
―07‖(PSB-L) or ―06‖(PSB-H) is displayed.
2. Press the ENTER / CHECK key to enter the
external output On/Off control setting mode.
3. Select On or Off with the encoder wheel, and
press the ENTER / CHECK key again to confirm
the settings. The external output on/off setting
is now complete. The output control modes are
shown below:
IN= The output is controlled with the OUTPUT
key.
OUT= The output is controlled with external
contacts.
OUTPUT key control
External Control
4. Press the ESC/ DISP key to quit the settings and
return to normal operation.