User Manual

PSB-2000 Series User Manual
54
Procedure
1. Press the MENU key until menu number ―02‖ is
displayed.
2. Press the ENTER/ CHECK key to toggle between
the OVP and OCP setting displays. On the PSB-
2400L2, the OVP and OCP settings for channel
1 appear first, followed by channel 2 next.
OVP setting
OCP setting
→
OVP and OCP setting of channel 1
OVP and OCP setting of channel 2
3. When the intended protection function is
displayed (OVP or OCP), rotate the encoder
wheel to set the OVP or OCP level.
4. Press the ENTER/ CHECK key to comfirm. The
setting is now complete.
5. Press the ESC/ DISP key to return to the normal
operation.