User Manual

GETTING STARTED
21
13
Rotary
encoder
Used to select the functions and change the
values.
14
V key (green)
( V )
Used for setting the voltage. Press the key and
rotate the encoder to change the set value. If the A
key is pressed while holding the V key, both LEDs
are lit and the Current LED enters the power
display mode.
15
A key (green)
( A )
Used for setting the current. Press the key and
rotate the encoder to change the set value. If the V
key is pressed while holding the A key, both LEDs
are lit and the Voltage LED enters the power
display mode.
16
PRESET 1
key (green)
(PRESET 1)
Reads out data stored in PRESET 1. Serves as a
start/pause key ( ) in the sequence mode.
17
PRESET 2
key (green)
(PRESET 2)
Reads out data stored in PRESET 2. Serves as a
back key ( ) to a skip to previous step number
in the sequence mode.
18
PRESET 3
key (green)
(PRESET 3)
Reads out data stored in PRESET 3. Serves as a
forward key ( ) to skip to the next step number
in the sequence mode.
19
MENU key
(MENU)
Used for setting and selecting various functions.