User Manual

MSO-2000E & 2000EA User Manual
344
Post-trigger
2,000,000 div maximum.
Timebase Accuracy
±50 ppm over any ≥ 1 ms time interval
Real Time Sample Rate
1GSa/s max. (4ch models);
1GSa/s per channel (2ch models)
Record Length
Max. 10Mpts
Acquisition Mode
Normal, Average, Peak Detect, Single
Peak Detection
2nS (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Channel 1; Channel 3*
*four channel models only
Y-Axis Input
Channel 2; Channel 4*
*four channel models only
Phase Shift
±3° at 100kHz
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available;
Unit: Seconds(s), Hz (1/s), Phase
(degree), Ratio (%).
Automatic
Measurement
38 sets: Pk-Pk, Max, Min, Amplitude,
High, Low, Mean, Cycle Mean, RMS,
Cycle RMS, Area, Cycle Area, ROVShoot,
FOVShoot, RPREShoot, FPREShoot,
Frequency, Period, RiseTime, FallTime,
+Width, -Width, Duty Cycle, +Pulses, -
Pulses, +Edges, -Edges, %Flicker, Flicker
Idx, FRR, FRF, FFR, FFF, LRR, LRF, LFR,
LFF, Phase.
Cursors measurement
Voltage difference between cursors ( ∆V)
Time difference between cursors ( ∆T)
Auto counter
6 digits, range from 2Hz minimum to the
rated bandwidth
Control Panel
Function
Autoset
Single-button, automatic setup of all
channels for vertical, horizontal and
trigger systems, with undo Autoset
Save Setup
20set
Save Waveform
24set
AWG
General:
Channels
2
Sample Rate
200MSa/s
Vertical Resolution
14 bits
Max. Frequency
25 MHz
Standard Waveforms
Sine, Square, Pulse, Ramp, DC, Noise
Built-in Waveforms
Sinc, Gaussian, Lorentz, Exponential
Rise, Exponential Fall, Haversine, Cardiac
Output Range
20 mVpp to 5 Vpp, HighZ
10 mVpp to 2.5 Vpp, 50Ω
Output Resolution
1mV