User Manual

MSO-2000E & 2000EA User Manual
32
Power Up
Requirements
The MSO-2000E/2000EA accepts line voltages of
100 ~ 240V at 50 or 60Hz.
Step
1. Connect the power cord to
the rear panel socket.
2. Press the POWER key. The
display becomes active in
~ 30 seconds.
: ON
: OFF
POWER
Note
The MSO-2000E/2000EA recovers the state right
before the power is turned OFF. The default settings
can be recovered by pressing the Default key on the
front panel. For details, see page 301.