User Manual

MSO-2000E & 2000EA User Manual
256
7. Use the Left and Right arrow keys
to select a base unit and use the
variable knob to increase or
decrease the offset by that base
unit, as shown in the Offset
window.
8. Default can be pressed to set the
Offset to 0.0Hz.
9. Press Go Back to leave the menu.
10. Select Ratio from the Freq Cpl Type
menu and press Ratio on the side
menu to configure the ratio of the
frequency coupling.
11. Use the Left and Right arrow keys
to select a base unit and use the
variable knob to increase or
decrease the ratio by that base unit,
as shown in the Ratio window.
12. Default can be pressed to set the
Ratio to 1.000.
13. Press Go Back to leave the menu.
14. Press again Go Back to leave the
menu Frequency Coupling menu.