User Manual

ARBITRARY WAVE GENERATOR
237
Phase
(Sine wave only)
8. Press Phase to set the phase of the
modulated wave (sine wave).
Phase
-180.0° ~ 180.0°
Duty Cycle
(Pulse wave only)
9. Press Duty Cycle to set the duty
cycle (pulse wave).
Duty Cycle
1.0% ~ 99.0%
Symmetry
(Ramp wave only)
10. Press Symmetry to set the
symmetry (ramp wave).
Symmetry
0% ~ 100%
Rate
(Noise wave only)
11. Press Rate to set the rate (noise
wave).
Noise
1kHz ~ 10MHz
Exit FM Settings
12. Press Go Back to exit the FM
settings.
FSK Modulation
Background
Frequency shift keying modulation can be used for
either channel. The carrier wave is limited to sine,
square and ramp waveforms. Sine, square, pulse,
ramp and noise can be selected as the modulating
waveform.