User Manual

ARBITRARY WAVE GENERATOR
227
Connection
1. Connect the BNC output (GEN1 or GEN2) to
the DUT using the GTL-101 BNC-Alligator clip
cables.
GEN1
GEN2
Output Setup
The Output Setup menu allows you to select a channel, to turn the
output on or off for the selected channel, configure the load
impedance and the phase of the output.
Select the Active Channel
Background
Before any operations can be performed on a
channel it must first be selected.
Panel Operation
1. Press the Option key.
Option
2. Press AWG from the bottom menu.
3. Press Output Setup.