User Manual

LOGIC ANALYZER
213
Note
Channels can also be selected just by turning the
variable knob when the mode is set to LA move mode.
In this mode the selected channel or group will be
shown on the Select soft-key. However this method
will only show those channels/groups that have
already been turned on. See below for details.
Moving the Digital Channels or Creating Digital Channel Groups
Note
The digital channels must first be activated. See
page 211.
Background
The logic analyzer has two basic modes of
operation for selecting or moving digital channels.
LA Select mode: This mode is used to select digital
channels that have already been activated.
LA Move mode: This mode is used to move the
vertical position of the digital channels and to
group digital channels into groups.
The Select key is used to toggle between both
modes when in the D15~D0 On/Off menu.
Panel Operation
1. Press the D15~D0 On/Off key. The
scope will initially be in 'LA Select
mode'.
2. Use the variable knob to choose a
channel or group. The selected
channel/group will be shown on
the Select key. Only channels that
have been activated can be selected
this way.
VARIABLE