User Manual

MSO-2000E & 2000EA User Manual
274
Auto Mask
Step
1. Press the Auto Mask button from
the bottom menu to create a mask
shaped out from an existing
waveform.
2. Press the Reference Source button from the side
menu to select the pattern the mask will be
shaped on.
3. Use the Variable knob to select the reference
source (CH1 or CH2 for 2 channels model and
CH1~CH4 for 4 channels models).
4. Press the Edit button from the side
menu if you want to further adjust
the mask pattern. Otherwise, go to
step 9 below to create the mask
directly without adjustment.
5. Press the Unit button from the side menu and
use the Variable knob to select either Divisions
(graticule division fractions) or Current (X or
Y axis actual scale units) as the units to set the
mask deviation from its original pattern.