User Manual

APPLICATIONS
257
Panel operation
1. In Setting mode (FRA Run button
appeared), press the FRA Run
button to start the frequency
response analysis.
2. The data acquisition will stop
automatically when the stop
frequency is reached. The
button is then toggled back to
STOP and the data is ready for
analysis.
If the user needs to cancel an on-
going FRA measurement, the
button can be pressed.
3. Using the second Analyze menu
button will switch to the Analysis
mode. Details regarding this mode
will be explained in later sections.
4. Press the icon to return to the
upper-level menu.
Source
Background
Use the Source menu to define the input source
and output source.
Note
Please make sure that the two analog channels used
by the FRA application are activated first.
Panel operation
1. Toggle the Source button.