User Manual

ManualsBrandsGW Instek ManualsComponent Testing InstrumentsHigh Frequency LCR Meter, Bench, 9.99GOhm, 9999.99kH,

LCR-8000 Series User Manual

30

Setting trigger mode

LCR-8200 Series offers REPEAT and SINGLE mode.

Steps

1. Press the Setup button to enter [MEAS

SETUP] page.

2. Use arrow keys to move cursor and select

TRIGGER item on the [MEAS SETUP]

page.

3. Use option key on the right of the LCD screen to

select a trigger mode for this measurement item.

Available

parameter

REPEAT

Internal trigger mode is also known as

continuous test. The trigger signal

performs continuous test in accordance

with the SPEED setting.

Press the Trigger button to pause the

trigger to stop the measurement and

display the “TRIG HOLD” message on

the top of the LCD.

Again press the Trigger button to resume

continuous triggering.

SINGLE

External trigger mode, including

Manual/Handler/TRIGGER

Input/Remote control mode.