User Manual

COMMAND OVERVIEW
203
the most suitable test range is set automatically.
Set syntax
:LIST:RANGe AUTO
:LIST:RANGe 1
Query syntax
:LIST:RANGe?
Return
data
AUTO |HOLD (Format is in <disc>)
:LIST:RETest {OFF|STEP|ALL|0|1|2}
:LIST:RETest?
Function： It sets or queries the FAIL RETEST of list mode.
Description：
Set parameter It retests continuously until the test result is pass,
when the test result is fail. If selecting <OFF>, it doesn’t execute this
function. If selecting <STEP 1>, only the first step is going to be
retested. If selecting <ALL>, no matter which step occur fail result,
the fail step is going to be retested until the result become pass.
Set syntax
:LIST:RETest STEP
:LIST:RETest 2
:LIST:RETest OFF
Query syntax
:LIST:RETest?
Return
data
OFF | STEP |ALL (Format is in <disc>)
:LIST:UPLoad {0|1}
:LIST:UPLoad?
Function： It sets or queries the auto upload of list mode.
Description：
Set parameter if it gives <0>, it disables the upload function. If it
gives <1>, it enables the upload function.It uploads the list test data
automatically, when the upload function is enabled.
:LCORrection:OPEN
:LCORrection:OPEN?
Function： It sets or queries to do the open correction of list mode.
Description：
:LCORrection:OPEN?