User Manual

LCR-8000 Series User Manual
142
Setting RS232 EOI
Set RS-232 command and return value the end of identify (EOI).
Steps
1. Press System button at the top right of
the LCD screen to enter the [SYSTEM
CONFIG] setting page.
2. Use up and down arrow keys to select
RS232 BAUD RATE on this setting
page.
3. Use option key on the right of the LCD screen
to select a desired item.
Available
parameter
LF
EOI is LF(0x0A)
CR
EOI is CR(0x0D)
CR+LF
EOI is CR+LF