User Manual

CORRECTION (OPEN/SHORT)
133
Setting spot no.
The SPOT LOAD compensation point can be set to a maximum of
16 points. If the test frequency and measurement parameters are
not the same, you need to increase the SPOT set point.
Steps
1. Press the Measure button to enter
[MEAS DISPLAY] page, and then
press the CORR. function button on
the right side of the LCD to enter the
[CORRECTION] page.
2. Use arrow keys to move cursor and
select SPOT No. item on the
[CORRECTION] page.
3. Use option key on the right of the LCD screen
to select ↑or↓ item switch point number.