User Manual

ManualsBrandsGW Instek ManualsComponent Testing InstrumentsHigh Frequency LCR Meter, Bench, 9.99GOhm, 9999.99kH,

LIST (MULTI STEP MODE)

101

Available

parameter

REPEAT

The repeat trigger mode is an internal

continuous test. Press the Trigger

button to start all the steps of the LIST

test, and repeat all the steps until the

STOP function button on the right side

of the LCD is pressed.

SINGLE

External trigger mode, including

Manual/Handler/TRIGGER

Input/Remote control mode.

 Manual mode: The device performs

a measurement once the Trigger

button is pressed.

 Handler mode: When a negative

edge pulse is received from the

handler interface on the rear panel,

the device performs a measurement

cycle.

 TRIGGER Input mode: When a

negative edge pulse is received

from the TRIGGER Input on the

rear panel, the device performs a

measurement cycle.

 Remote control mode: When a

measurement command is sent

from the RS-232 or USB or GPIB

interface, the device performs a

measurement cycle.

AUTO

Automatic trigger mode.

After the measurement terminal is

open, it will enter the standby mode

"Wait On" , the instrument

will always measure, after measuring

the value, it will start the trigger

condition for measurement, and after

the LIST step test, it will enter the

waiting for end mode "Wait