User manual

GSP-9300 Programming Manual
94
:CALCulate:LIMit<n>:CLEar
Set
Description
Clears the High Limit, Low Limit and the
Pass/Fail state for the selected limit line.
Syntax
:CALCulate:LIMit<n>:CLEar
Parameter
<n>
Selected limit line
Example
:CALC:LIM1:CLE
:CALCulate:LIMit<n>:DATA
Set
Query
Description
Sets or queries the frequency, amplitude limit of
every point in the selected limit line. The data is
stored in CSV format.
There are total of 10 pairs of data points (20 data
entries in total) for the <csv data> data.
Syntax
:CALCulate:LIMit<n>:DATA <csv data>
Query Syntax
:CALCulate:LIMit<n>:DATA?
Parameter/
Return parameter
<csv data>
pt#1 freq, pt#1 limit, …….pt#10 freq,
pt#10 limit.
<n>
Seleted limit line
Example
:CALCulate:LIMit3:DATA?
>1e+6,-10,2e+6,-30,3e+6,-40,4e+6……………
:CALCulate:LIMit:FAIL?
Query
Description
Returns the Pass/Fail judgment.
Query Syntax
:CALCulate:LIMit:FAIL?
Return parameter
0
Pass
1
Fail
Query Example
:CALC:LIM:FAIL?
>1