User manual

REMOTE CONTROL
89
Syntax
:CALCulate:DEMod:AM:STATe {ON|OFF|1|0}
Query Syntax
:CALCulate:DEMod:AM:STATe?
Parameter
0
Turn AM Analysis off.
1
Turn AM Analysis on.
OFF
Turn AM Analysis off.
ON
Turn AM Analysis on.
Return parameter
0
AM Analysis is off.
1
AM Analysis is on.
Example
:CALC:DEM:AM:STAT 1
:CALCulate:DEMod:EARPhone:STATe
Set
Query
Description
Sets or queries the state of the ear phone out port.
Syntax
:CALCulate:DEMod:EARPhone:STATe {ON|OFF|1|0}
Query Syntax
:CALCulate:DEMod:EARPhone:STATe?
Parameter
0
Turn the phone output off.
1
Turn the phone output on.
OFF
Turn the phone output off.
ON
Turn the phone output on.
Return parameter
0
Phone output is off.
1
Phone output is on.
Example
:CALC:DEM:EARP:STAT 1
:CALCulate:DEMod:FM:RESult:CURRent?
Query
Description
Returns the current measurement results for FM
demodulation as a comma separated string.
Query Syntax
:CALCulate:DEMod:FM:RESult:CURRent?
Return parameter
<deviation,rate,power,offset,sinad>
deviation
Frequency deviation in Hz.
rate
Modulation rate in Hz.
power
Carrier power in the current Y-axis units.
offset
Carrier frequency offset in Hz.