User manual

REMOTE CONTROL
79
:CALCulate:MARKer<n>:TYPE .................................... 105
:CALCulate:MARKer<n>:X ............................................ 106
:CALCulate:MARKer<n>:Y? ........................................... 106
:CALCulate:MATH:PDIF ................................................. 106
:CALCulate:MATH:LDIF ................................................. 107
:CALCulate:MATH:LOFF ................................................ 107
:CALCulate:NDB:STATe .................................................. 107
:CALCulate:NDB:BANDwidth|BWIDth? .................... 108
:CALCulate:NORMalize:STATe ...................................... 108
:CALCulate:OCBW:STATe .............................................. 109
:CALCulate:OCBW:BANDwidth|BWIDth? ................. 109
:CALCulate:OCBW:CHPower? ........................................ 109
:CALCulate:OCBW:POWer? ............................................ 110
:CALCulate:OCBW:PSD? ................................................. 110
:CALCulate:P1DB:STATe ................................................. 110
:CALCulate:P1DB:GAIN:AVERage? ............................. 111
:CALCulate:P1DB:GAIN:RESult? ................................... 111
:CALCulate:P1DB:RESult? ............................................... 111
:CALCulate:PMETer:POWer? .......................................... 112
:CALCulate:PMETer:LIMit:STATe ................................. 112
:CALCulate:PMETer:LIMit:FAIL? .................................. 112
:CALCulate:SEM:STATe ................................................... 113
:CALCulate:SEM:OFFSet<n>:RESult? .......................... 113
:CALCulate:TOI:DIFFerential? ........................................ 114
:CALCulate:TOI:FREQuency:DIFFerential? ................. 114
:CALCulate:TOI:LIMit:STATe ........................................ 114
:CALCulate:TOI:RESult? .................................................. 115
:CALCulate:TOI:STATe .................................................... 115
:CALCulate:ACPR:ACHannel<n>:HLIMit:
FAIL?
Query
Description
Returns the ACPR upper limit pass/fail judgment
for the selected adjacent channel.
Query Syntax
:CALCulate:ACPR:ACHannel<n>:HLIMit:FAIL?
Parameter
<n>
<NR1>adjacent channel 1~3
Return parameter
0
<boolean>Pass
1
<boolean>Fail